Hydrobrite APC Powder Additive

HydroBrite is a powder based additive for Fiberlock’s IAQ Advanced Peroxide Cleaner (APC). HydroBrite is the first adjustable stain remover designed to remove stains from mold and mildew to help restore a substrate to its original look.

When added to Advanced Peroxide Cleaner, Fiberlock’s HydroBrite:

• Removes stains from mold and mildew
• Lifts and removes deeply embedded dirt and debris
• Ideal for OSB, plywood, wood framing and concrete

DIRECTIONS FOR USE

USER MUST READ AND UNDERSTAND ALL INSTRUCTIONS AND PRECAUTIONS OUTLINED ON THIS LABEL AND THE CORRESPONDING SDS. FOR PROFESSIONAL USE ONLY.

HYDROBRITE ADDITIVE IS FOR USE WITH FIBERLOCK’s ADVANCED PEROXIDE CLEANER (#8314) ONLY. DO NOT MIX WITH ANY OTHER PRODUCT.

NOTE: The HydroBrite mixture should be used within 20-30 minutes to achieve the full effect of the product. Application to the substrate within 5-10 minutes is ideal. Plan your work accordingly so that you can apply all mixed product as quickly as possible. Do not return unused product to original container.

Using the enclosed 80 CC scoop, add HydroBrite to Advanced Peroxide Cleaner at the following dilution ratio and mix contents thoroughly:

1.  Minimum: 1 level scoop of HydroBrite powder per gallon of Advanced Peroxide Cleaner
2. Typical: 3 Level scoops per gallon of Advanced Peroxide Cleaner
3. Maximum: 6 level scoops of HydroBrite powder per gallon of Advanced Peroxide Cleaner

Apply with a standard pump or hand trigger sprayer. Agitation with a nylon bristle brush is recommended to maximize stain removal. HydroBrite can leave a slight white powdery residue on substrates when dry. Rinse with clean water or use a damp wipe. Allow up to 24 hours for full surface brightening to take effect.

KEEP OUT OF REACH OF CHILDREN. FOR PROFESSIONAL USE ONLY.

24 hour Emergency call “CHEM-TEL” 1-800-255-3924

PRECAUTIONS

HydroBrite is a high pH additive formulated to boost the performance of the Advanced Peroxide Cleaner. Always test substrate in an inconspicuous area to determine if the solution will adversely affect the target material. This product is not intended for use on soft metals as pitting and etching can occur. Will degloss painted surfaces. Do not use on fine or finished woods as HydroBrite can affect the finish of the wood. Do not use on glass. Protect floors and surrounding surfaces from contact. Promptly clean off any overspray or dripping from floors.

DANGER:

Precautionary Statements:

Prevention: Wear protective gloves/protective clothing/eye protection/face protection. Do not breathe fumes, dust, mist, vapors or spray. Wash hands thoroughly after handling. Do not eat, drink or smoke when using this product.

Response: IF IN EYES: Rinse cautiously

Properties

Product Specifications

• Active Ingredient: Sodium Carbonate
• Colour: White Powder
• Odor: None
• Foaming: High Foaming
• Flash Point: Non-combustible
• pH: 12.5-13.5
• Shelf Life: 3 Years Min.(Original Sealed Containers)

Coverage (when mixed with Advanced Peroxide Cleaner)

500-1200 ft2/gal

Coverage rates are approximate and depend on how heavily the Advanced Peroxide Cleaner is applied to the substrate.

Available Package Sizes

1.65 lbs (.75 kg)

with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTER or doctor/physician.

IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. Wash contaminated clothing before reuse.

IF INHALED: Remove person to fresh air and keep comfortable for breathing.

Call a POISON CENTER or doctor/physician if you feel unwell.Storage: Store locked up.

Disposal: Dispose of contents/container in accordance with all local, state, and federal regulations.Hazard Statements:Causes serious eye damage.Causes severe skin burns and eye damage.

Used for: Removing Stains 
Chemical Type: Powder Base
Price: $34 including GST
Available in 1kg